Bonding Plastic Enclosures and Moulded Parts
Plastic components and mouldings of, for example, shrouds, protective panels, art objects, showcases, display stands, shop or exhibition shelving and newspaper stands made from transparent plastics can often be joined only by bonding.
Plastic panels are usually edge- or mitre-joined. Special adhesives also allow stress crack-free bonding of laser-cut edges. For large-surface bonds between plastic panels, on the other hand, very soft, elastic adhesives are required.
Many of these adhesives have a high transparency, so that the joint melds into the assembly after gluing. Edges and mitres appear as if made from a single piece and are no longer recognizable as bonded joints.

Brochure racks made from transparent plastics can be joined with Panacol adhesive.
The table below lists a selection of adhesives from Panacol that are recommended for gluing plastic enclosures. Further products and custom solutions are available on request.
To download the technical datasheets (TDS) please click on the adhesive name.
Adhesive/ Glue | Viscosity [mPas] | Base | Curing* | Suitable for bonding these substrates: |
---|---|---|---|---|
Vitralit® 4730 | 70-150 | acrylate |
UV VIS |
|
Vitralit® 4731 | 900-1,500 (LVT, 25°C, Sp. 3/30 rpm) | acrylate |
UV VIS |
Excellent adhesion to plastics, anodized plastics, glass, ceramics |
Vitralit® 4731 VT | 4,000-8,000 | acrylate |
UV VIS |
excellent adhesion to plastics, anodized plastics, glass, ceramics |
Vitralit® 4732 VT | 7,000-9,000 | acrylate |
UV VIS |
|
Vitralit® 4735 HC | 700-1,000 | acrylate |
UV VIS secondary heat cure |
|
Vitralit® 5140 | 250-500 | acrylate |
UV VIS |
|
Vitralit® 5140 VT | 5,000-10,000 (Rheometer, 25°C, 10s^-1) | acrylate |
UV VIS |
|
Vitralit® 7283 | 70-130 | acrylate |
UV VIS |
|
Vitralit® 7311 | 30-100 | acrylate |
UV VIS |
|
Vitralit® 7313 | 40-70 | acrylate |
UV VIS |
|
Vitralit® 7631 | 100-300 | acrylate |
UV VIS |
|
Vitralit® 7641 | 10-100 | acrylate |
UV VIS |
|
Vitralit® 7642 | 1,500-2,500 | acrylate |
UV VIS |
|
Vitralit® 7989 | 3,000-5,000 | acrylate | UV | |
Vitralit® 9140 VL | 1,000-2,000 | acrylate |
UV VIS |
|
Vitralit® UD 5134 | 15,000-25,000 | acrylate |
UV VIS secondary heat cure |
|
Vitralit® UV 2113 | 19,000-32,000 (Rheometer, 25°C, 10s^-1) | acrylate |
UV VIS |
|
Vitralit® UV 2115 | 20,000-30,000 (Rheometer, 25°C, 50s^-1) | acrylate |
UV VIS |
|
Vitralit® UV 2150 | 140-500 | acrylate |
UV VIS |
|
Vitralit® VBB-1 | 1,000-1,500 | acrylate |
UV VIS |
|
Vitralit® VBB 1 Gel | 12,000-30,000 | acrylate |
UV VIS |
|
Structalit® 5800 | 12,000-22,000 part A (LVT 25°C, Sp. 4/12 rpm); 500-800 part B (LVT 25°C, Sp. 2/30 rpm); 7,000-15,000 mix (LVT, 25°C, Sp. 4/30 rpm) | 2-part epoxy | thermal, room temperature | |
Structalit® 5810-1 | 1,000-1,500 part A (LVT 25°C, Sp. 3/30 rpm); 3,500-4,500 part B (LVT 25°C, Sp. 4/30 rpm); 3,000-4,000 mix (LVT, 25°C, Sp. 4/30 rpm) | 2-part epoxy |
thermal room temperature |
|
Cyanolit® 200 | 1-3 | cyanoacrylate |
moisture, room temperature |
|
Cyanolit® 201 | 1-3 | cyanoacrylate |
moisture, room temperature |
|
Cyanolit® 202 | 70-100 | cyanoacrylate |
moisture, room temperature |
|
Cyanolit® 203 TX | shear thinning | cyanoacrylate |
moisture, room temperature |
|
Cyanolit® 241 F | 30-50 | cyanoacrylate |
moisture, room temperature |
Instant adhesive plastic bonder perfect choice for mirror bonding |
Cyanolit® 732 F | 230-350 (LVT, 25 °C, Sp. 2/60 rpm) | cyanoacrylate |
moisture, room temperature |
|
Cyanolit® 811 F | 4-12 (LVT, 25 °C, Sp. 2/60 rpm) | cyanoacrylate |
moisture, room temperature |
|
Cyanolit® Gel 10 | 100,000-240,000 | cyanoacrylate |
moisture, room temperature |
*UV = 320 - 390 nm VIS = 405 nm