Hoenle LED Powerline LC & LED powerdrive

Originally developed for high-speed inkjet printing, Hoenle's LED Powerline LC has proven great success and efficiency in curing UV and visible light curing adhesives, coatings and sealants. The LED array is available in the following wavelengths: 365, 385, 395 or 405nm. Thanks to water cooling, the LED Powerline LC can achieve very high intensities of up to 30,000 mW/cm2 at 405nm. Its compact dimensions and low weight simplify integration into automated processes. The device can be programmed and controlled via external inputs. Water cooling is required for this LED curing system, making it perfect for use in clean rooms.

Starting from the standard size of 76 x 10 mm, the irradiated area can be extended to any desired length in 38 mm increments.
 

Additional features:

  • Driving and monitoring of a LED segment up to a maximum electric power of 400 W
  • Monitoring of LED segments for short-circuit, interruption and excess temperature
  • Registration of operating hours of LED segments
  • Analogue dimming of the segments via a 0-10 V-signal
  • Digital PLC-interface (emergency-stop, LED-on, LED failure, temperature warning)

Water-cooled  large area curing system LED Powerline LC with tabletop LED Powerdrive control unit from Hoenle

Technical Data for LED Powerline LC & LED powerdrive

LED service life: > 20.000 hours*
Adjustment range of timer: 0.01 - 99.99   or   0.1 - 999.9   or   1 - 9999 sec. or continuous operation

Wavelengths in nm:

Typical intensity in mW/cm²**:

  365         385        395        405

14.000   20.000   25.000   25.000

Power supply LED powerdrive: 90 V – 264 V, 47 Hz – 63 Hz
Max. input current: 2.2 A
Irradiation area *** ca. 76 x 10 mm  or   ca. 114 x 10 mm
Dimensions LED head without connectors (H x W x D) ca. 86 x 20 x 50 mm or ca. 124 x 20 x 50 mm

*     typical lifetime under specified operating conditions
**   measured with Hönle LED sensors for UV meter
*** other lengths on enquiry